Temperature profiles during ureteroscopy with thulium fiber laser and holmium:YAG laser: Findings from a pre-clinical study
DOI:
https://doi.org/10.1080/21681805.2022.2104367Abstract
Abstract Objective The aim of this study was to investigate temperature profiles in both the renal pelvis and parenchyma during Thulium Fiber Laser (TFL) and Holmium:yttrium-aluminium-garnet (Ho:YAG) laser activation in an ex-vivo porcine model. Methods Three porcine kidneys with intact renal pelvis and proximal ureters were used in the study. A temperature sensor was inserted through a nephrostomy tube into the renal pelvis and a second sensor was inserted directly into the renal parenchyma. Temperatures were recorded during continuous laser activation for 180 s, and for an additional 60 s after deactivation. TFL (150 μm and 200 μm) and Ho:YAG (270 μm) laser delivered power at settings of 2.4 W, 8 W, 20 W and 30 W. Results Intrapelvic temperatures correlated directly to power settings. Higher power produced higher temperatures. For example, using a 150 μm fiber at 2.4 W resulted in a 2.6 °C rise from baseline (p = 0.008), whereas using the same fiber at 20 W produced a rise in temperature of 19.9 °C (p = 0.02). Larger laser fibers caused significantly higher temperatures compared to smaller fibers using equivalent power settings, e.g. mean temperature at 20 W using 150 μm was 39.6 °C compared to 44.9 °C using 200 μm, p Conclusion In this ex-vivo study, renal temperatures correlated directly to power settings. Higher power produced higher temperatures. Furthermore, larger laser fibers caused higher temperatures. These findings could help guide selection of safe power settings for ureteroscopic lithotripsy, but future clinical studies are needed for confirmation.Downloads
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Author(s)
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Acta Chirurgica Scandinavica Society owns the copyright for all material published until Volume 57 (2023) unless otherwise specified. As from Volume 59 (2024) all published articles, unless otherwise specified, are published under CC-BY licences, allowing third parties to copy and redistribute the material in any medium or format and to remix, transform, and build upon the material, with the condition of proper attribution to the original work.