Effect of output intensity of light curing unit on coronal tooth discoloration induced by silicate calcium-based materials: an ex vivo study

Authors

  • Fatemeh Farshad Student’s Scientific Research Center, Tehran University of Medical Education, Tehran, Iran
  • Noushin Shokouhinejad Department of Endodontics, School of Dentistry, Tehran University of Medical Sciences, Tehran, Iran
  • Parham Pedram Department of Dental Biomaterial, School of Dentistry, Shahid Beheshti University of Medical Sciences, Tehran, Iran
  • Mohammad Javad KharaziFard Dental Research Center, Dentistry Research Institute, Tehran University of Medical Sciences, Tehran, Iran
  • Elham Ahmadi Dental Research Center, Dentistry Research Institute, Tehran University of Medical Sciences, Tehran, Iran

DOI:

https://doi.org/10.2340/biid.v13.45896

Keywords:

Dental curing light, mineral trioxide aggregate, tooth discoloration

Abstract

Objective: Clinicians have various curing options due to new light-cure devices with different intensities. The present study aimed to evaluate the effect of two light-curing intensities (1,200 mW/cm² vs. 3,000 mW/cm²) on coronal discoloration induced by two calcium silicate-based cements (OrthoMTA and RetroMTA) in an endodontically treated bovine tooth model.

Materials and Methods: Forty single-rooted bovine incisors were prepared, and their canals were filled with blood-soaked foam to the cemento-enamel junction. The samples were randomly divided into four groups (n = 10 per group) based on the cement used (OrthoMTA or RetroMTA) and the subsequent light-curing intensity. For all groups, a 2-mm layer of the assigned cement was placed. This was covered by 1 mm of resin-modified glass ionomer (RMGI), a bonding agent, and 2 mm of composite. In two groups, all light-curing steps (RMGI, bonding agent, composite) were performed at 1,200 mW/cm². In the other two groups, curing was performed at 3,000 mW/cm². All samples underwent 5,000 cycles of thermocycling. Color was assessed with a spectrophotometer immediately after composite placement and after aging. Color change (ΔE) and lightness change (ΔL) were calculated.

Results: All groups exhibited ΔE values exceeding the clinically acceptable threshold (ΔE > 3.3) and demonstrated a decrease in ΔL after aging. Statistical analysis (two-way ANOVA, α = 0.05) revealed no significant difference in ΔE or ΔL between samples cured with high-intensity (3,000 mW/cm²) or low-intensity (1,200 mW/cm²) light, regardless of the cement type used (p > 0.05).

Conclusions: Within the limitations of this study, the same amount of energy produced by high- or low-intensity light-cures (1,200 or 3,000 mW/cm²), when delivering the same total energy, did not result in a statistically significant difference in coronal discoloration caused by OrthoMTA or RetroMTA.

Downloads

Download data is not yet available.

References

Torabinejad MWT, Pitt Ford TR. Sealing ability of a mineral trioxide aggregate when used as a root end filling material. J Endod. 1993;19(12):4. DOI: https://doi.org/10.1016/S0099-2399(06)80271-2

Kang SH, Shin YS, Lee HS, Kim SO, Shin Y, Jung IY, et al. Color changes of teeth after treatment with various mineral trioxide aggregate-based materials: an ex vivo study. J Endod. 2015;41(5):737–41. DOI: https://doi.org/10.1016/j.joen.2015.01.019

Shokouhinejad N. Endodontics in the era of hydraulic calcium silicate cements: special focus on tooth discolouration following regenerative endodontic treatment. ENDO EPT. 2020;14(3):8.

Çalışkan MK, Güneri P. Prognostic factors in direct pulp capping with mineral trioxide aggregate or calcium hydroxide: 2- to 6-year follow-up. Clin Oral Investig. 2017;21(1):357–67. DOI: https://doi.org/10.1007/s00784-016-1798-z

Savaris JM, Czornobay LFM, Dotto MEP, Santos PS, Garcia L, Vitali FC, et al. Tooth discoloration induced by endodontic sealers of different chemical bases: a systematic review. Braz Dent J. 2024;35:e246021. DOI: https://doi.org/10.1590/0103-6440202406021

Shokouhinejad N, Nekoofar MH, Pirmoazen S, Shamshiri AR, Dummer PM. Evaluation and comparison of occurrence of tooth discoloration after the application of various calcium silicate-based cements: an ex vivo study. J Endod. 2016;42(1):140–4. DOI: https://doi.org/10.1016/j.joen.2015.08.034

Możyńska J, Metlerski M, Lipski M, Nowicka A. Tooth discoloration induced by different dalcium silicate-based cements: a systematic review of in vitro studies. J Endod. 2017;43(10):1593–601. DOI: https://doi.org/10.1016/j.joen.2017.04.002

Vallés M, Mercadé M, Duran-Sindreu F, Bourdelande JL, Roig M. Color stability of white mineral trioxide aggregate. Clin Oral Investig. 2013;17(4):1155–9. DOI: https://doi.org/10.1007/s00784-012-0794-1

Camilleri J. Color stability of white mineral trioxide aggregate in contact with hypochlorite solution. J Endod. 2014;40(3):436–40. DOI: https://doi.org/10.1016/j.joen.2013.09.040

Camilleri J, Borg J, Damidot D, Salvadori E, Pilecki P, Zaslansky P, et al. Colour and chemical stability of bismuth oxide in dental materials with solutions used in routine clinical practice. PLoS One. 2020;15(11):e0240634. DOI: https://doi.org/10.1371/journal.pone.0240634

Mousavinasab SM, Meyers I. Comparison of depth of cure, hardness and heat generation of LED and high intensity QTH light sources. Eur J Dent. 2011;5(3):299–304. DOI: https://doi.org/10.1055/s-0039-1698895

Stewardson DA, Shortall AC, Harrington E, Lumley PJ. Thermal changes and cure depths associated with a high intensity light activation unit. J Dent. 2004;32(8):643–51. DOI: https://doi.org/10.1016/j.jdent.2004.06.007

Percie du Sert N, Hurst V, Ahluwalia A, Alam S, Avey MT, Baker M, et al. The ARRIVE guidelines 2.0: updated guidelines for reporting animal research. PLoS Biol. 2020;18(7):e3000410. DOI: https://doi.org/10.1371/journal.pbio.3000410

Yong D, Cathro P. Conservative pulp therapy in the management of reversible and irreversible pulpitis. Aust Dent J. 2021;66 Suppl 1: S4–14. DOI: https://doi.org/10.1111/adj.12841

Mirzaei K, Ahmadi E, Rafeie N, Abbasi M. The effect of dentin surface pretreatment using dimethyl sulfoxide on the bond strength of a universal bonding agent to dentin. BMC Oral Health. 2023;23(1):250. DOI: https://doi.org/10.1186/s12903-023-02913-3

Gale MS, Darvell BW. Thermal cycling procedures for laboratory testing of dental restorations. J Dent. 1999;27(2):89–99. DOI: https://doi.org/10.1016/S0300-5712(98)00037-2

Pop-Ciutrila IS, Colosi HA, Dudea D, Badea ME. Spectrophotometric color evaluation of permanent incisors, canines and molars. A cross-sectional clinical study. Clujul Med. 2015;88(4):537–44. DOI: https://doi.org/10.15386/cjmed-497

Marciano MA, Costa RM, Camilleri J, Mondelli RF, Guimarães BM, Duarte MA. Assessment of color stability of white mineral trioxide aggregate angelus and bismuth oxide in contact with tooth structure. J Endod. 2014;40(8):1235–40. DOI: https://doi.org/10.1016/j.joen.2014.01.044

Xavier SR, Pilownic KJ, Gastmann AH, Echeverria MS, Romano AR, Geraldo Pappen F. Bovine tooth discoloration induced by endodontic filling materials for primary teeth. Int J Dent. 2017;2017:7401962. DOI: https://doi.org/10.1155/2017/7401962

Soares FZM, Follak A, da Rosa LS, Montagner AF, Lenzi TL, Rocha RO. Bovine tooth is a substitute for human tooth on bond strength studies: a systematic review and meta-analysis of in vitro studies. Dent Mater. 2016;32(11):1385–93. DOI: https://doi.org/10.1016/j.dental.2016.09.019

Camargo MA, Marques MM, de Cara AA. Morphological analysis of human and bovine dentine by scanning electron microscope investigation. Arch Oral Biol. 2008;53(2):105–8. DOI: https://doi.org/10.1016/j.archoralbio.2007.09.005

VanderWeele RA, Schwartz SA, Beeson TJ. Effect of blood contamination on retention characteristics of MTA when mixed with different liquids. J Endod. 2006;32(5):421–4. DOI: https://doi.org/10.1016/j.joen.2005.09.007

Eghbal MJ, Torabzadeh H, Bagheban AA, Shamszadeh S, Marvasti LA, Asgary S. Color stability of mineral trioxide aggregate and calcium enriched mixture cement. J Investig Clin Dent. 2016;7(4):341–6. DOI: https://doi.org/10.1111/jicd.12164

Vallés M, Mercadé M, Duran-Sindreu F, Bourdelande JL, Roig M. Influence of light and oxygen on the color stability of five calcium silicate-based materials. J Endod. 2013;39(4):525–8. DOI: https://doi.org/10.1016/j.joen.2012.12.021

Khedmat S, Ahmadi E, Meraji N, Fallah ZF. Colorimetric comparison of internal bleaching with and without removing mineral trioxide aggregate (MTA) on induced coronal tooth discoloration by MTA. Int J Dent. 2021;2021:8319986. DOI: https://doi.org/10.1155/2021/8319986

Koutayas SO, Kakaboura A, Hussein A, Strub JR. Colorimetric evaluation of the influence of five different restorative materials on the color of veneered densely sintered alumina. J Esthet Restor Dent. 2003;15(6):353–60; discussion 61. DOI: https://doi.org/10.1111/j.1708-8240.2003.tb00308.x

Meireles S, Demarco F, Santos I, Dumith S, Della Bona A. Validation and reliability of visual assessment with a shade guide for tooth-color classification. Oper Dent. 2008;33:121–6. DOI: https://doi.org/10.2341/07-71

Farahani S, Faghihi T, Ranjbar Omrani L, Chiniforush N, Ahmadi E, Karimi M, et al. Effect of laser and conventional office bleaching and polishing on the color change of stained nanohybrid and microhybrid composite resin. Int J Dent. 2023;2023:9912560. DOI: https://doi.org/10.1155/2023/9912560

Paravina RD, Pérez MM, Ghinea R. Acceptability and perceptibility thresholds in dentistry: a comprehensive review of clinical and research applications. J Esthet Restor Dent. 2019;31(2):103–12. DOI: https://doi.org/10.1111/jerd.12465

Guimarães BM, Tartari T, Marciano MA, Vivan RR, Mondeli RF, Camilleri J, et al. Color stability, radiopacity, and chemical characteristics of white mineral trioxide aggregate associated with 2 different vehicles in contact with blood. J Endod. 2015;41(6):947–52. DOI: https://doi.org/10.1016/j.joen.2015.02.008

Shokouhinejad N, Razmi H, Farbod M, Alikhasi M, Camilleri J. Coronal tooth discoloration induced by regenerative endodontic treatment using different scaffolds and intracanal coronal barriers: a 6-month ex vivo study. Restor Dent Endod. 2019;44(3):e25. DOI: https://doi.org/10.5395/rde.2019.44.e25

Ramos JC, Palma PJ, Nascimento R, Caramelo F, Messias A, Vinagre A, et al. 1-year in vitro evaluation of tooth discoloration induced by 2 calcium silicate–based cements. J Endod. 2016;42(9):1403–7. DOI: https://doi.org/10.1016/j.joen.2016.06.012

Esmaeili B, Alaghehmand H, Kordafshari T, Daryakenari G, Ehsani M, Bijani A. Coronal discoloration induced by calcium-enriched mixture, mineral trioxide aggregate and calcium hydroxide: a spectrophotometric analysis. Iran Endod J. 2016;11(1):23–8.

Marconyak LJ, Jr, Kirkpatrick TC, Roberts HW, Roberts MD, Aparicio A, Himel VT, et al. A comparison of coronal tooth discoloration elicited by various endodontic reparative materials. J Endod. 2016;42(3): 470–3. DOI: https://doi.org/10.1016/j.joen.2015.10.013

Published

2026-05-08

How to Cite

Farshad, F., Shokouhinejad, N., Pedram, P., KharaziFard, M. J., & Ahmadi, E. (2026). Effect of output intensity of light curing unit on coronal tooth discoloration induced by silicate calcium-based materials: an ex vivo study. Biomaterial Investigations in Dentistry, 13(1), 379–384. https://doi.org/10.2340/biid.v13.45896