Effect of fluoride toothpastes on surface roughness of nickel–titanium wires: an in vitro study
DOI:
https://doi.org/10.2340/biid.v13.46087Keywords:
Nickel–titanium archwires, orthodontics, toothpaste, toothbrushing, surface roughnessAbstract
Objective: The main objective of this in vitro study was to determine the effect of toothbrushing with fluoride and natural fluoride-free toothpastes on surface roughness changes of nickel-titanium (NiTi) wires as an indirect indicator of corrosion-related surface degradation.
Materials and Methods: Thirty rectangular superelastic NiTi wires (0.019 × 0.025”, 20 mm length; Orthometric) were randomly assigned to three groups (n = 10 each): Group 1 – fluoride toothpaste with brushing; Group 2 – fluoride toothpaste without brushing; Group 3 – fluoride-free toothpaste with brushing. Brushing was simulated with an electric toothbrush twice daily for 1 min over 28 days (cumulative 1 h). Initial and final surface roughness (Rz, µm) was measured using a portable roughness tester. Data were analyzed using paired Student’s t-test and ANOVA with Tukey post hoc comparisons (p < 0.05).
Results: Significant increases in surface roughness were observed in Group 1 (0.717 ± 0.085 to 2.440 ± 0.225 µm; p < 0.001) and Group 2 (0.791 ± 0.082 to 1.904 ± 0.247 µm; p < 0.001). In contrast, Group 3 showed only a slight and non-significant increase in surface roughness (p = 0.167). Intergroup analysis revealed significant post-treatment differences (p < 0.001), with Tukey’s test distinguishing three subsets: Group 1 > Group 2 > Group 3.
Conclusions: Fluoride-containing toothpaste, particularly when combined with brushing, significantly increased surface roughness of NiTi wires, likely due to fluoride-induced degradation of the protective titanium oxide layer, which increases susceptibility to surface deterioration. Clinically, these findings suggest that fluoride-free formulations may represent a safer alternative for orthodontic patients requiring prolonged use of NiTi wires.
Downloads
References
Selvaraj M, Mohaideen K, Sennimalai K, Gotanda GS, Arora G. Effect of oral environment on contemporary orthodontic materials and its clinical implications. J Orthod Sci. 2023;12:1. DOI: https://doi.org/10.4103/jos.jos_73_22
Velasco-Ibáñez R, Lara-Carrillo E, Morales-Luckie RA, Romero-Guzmán ET, Toral-Rizo VH, Ramírez-Cardona M, et al. Evaluation of the release of nickel and titanium under orthodontic treatment. Sci Rep. 2020;10(1):22280. DOI: https://doi.org/10.1038/s41598-020-79221-1
Condò R, Carli E, Cioffi A, Cataldi ME, Quinzi V, Casaglia A, et al. Fluorinated agents effects on orthodontic alloys: a descriptive in vitro study. Materials (Basel). 2022;15(13):4612. DOI: https://doi.org/10.3390/ma15134612
Pastor F, Rodriguez JC, Barrera JM, García-Menocal JaD, Brizuela A, Puigdollers A, et al. Effect of fluoride content of mouthwashes on the metallic ion release in different orthodontics archwires. Int J Environ Res Public Health. 2023;20(4):2780. DOI: https://doi.org/10.3390/ijerph20042780
Močnik P, Kosec T, Kovač J, Bizjak M. The effect of pH, fluoride and tribocorrosion on the surface properties of dental archwires. Mater Sci Eng C Mater Biol Appl. 2017;78:682–9. DOI: https://doi.org/10.1016/j.msec.2017.04.050
Ogawa CM, Faltin K, Jr, Maeda FA, Ortolani CLF, Guaré RO, Cardoso CaB, et al. In vivo assessment of the corrosion of nickel-titanium orthodontic archwires by using scanning electron microscopy and atomic force microscopy. Microsc Res Tech. 2020;83:928–36. DOI: https://doi.org/10.1002/jemt.23486
Belasic TZ, Pejova B, Curkovic HO, Kamenar E, Cetenovic B, Spalj S. Influence of intraoral application of antiseptics and fluorides during orthodontic treatment on corrosion and mechanical characteristics of nickel-titanium alloy in orthodontic appliances. Angle Orthod. 2021;91:528–37. DOI: https://doi.org/10.2319/052620-480.1
Uysal I, Yilmaz B, Atilla AO, Evis Z. Nickel titanium alloys as orthodontic archwires: a narrative review. Eng Sci Technol Int J. 2022;36:101277. DOI: https://doi.org/10.1016/j.jestch.2022.101277
Srinivasan D, Krishnan RK. Mechanical properties and potential clinical implications of improved superelastic orthodontic archwires: an observational study. Cureus. 2023;15:e48334. DOI: https://doi.org/10.7759/cureus.48334
Barathi VS, Kaul A, Tiwari A, Aliya S, Yadav A, Bera T, et al. Assessment of various archwire materials and their impact on orthodontic treatment outcomes. Cureus. 2024;16:e69667.
Espinoza-Montero PJ, Montero-Jiménez M, Fernández L, Paz JL, Piñeiros JL, Ceballos SM. In vitro wearing away of orthodontic brackets and wires in different conditions: a review. Heliyon. 2022;8:e10560. DOI: https://doi.org/10.1016/j.heliyon.2022.e10560
Mikulewicz M, Suski P, Tokarczuk O, Warzyńska-Maciejewska M, Pohl P, Tokarczuk B. Metal ion release from orthodontic archwires: a comparative study of biocompatibility and corrosion resistance. Molecules. 2024;29(23):5685. DOI: https://doi.org/10.3390/molecules29235685
Farrag O, Shamaa NEA, Elgameay WE, Bayoumi DA. Clinical effect of chlorhexidine and sodium fluoride on corrosion behavior and surface topography of nitinol orthodontic archwires. BMC Oral Health. 2024;24:564. DOI: https://doi.org/10.1186/s12903-024-04289-4
Pipatvadekul N, Insee K, Inglam S. Effect of fluoride-containing products on nickel-free orthodontic brackets. Mahidol Dent J. 2021;41:69–74.
Łosiewicz B, Osak P, Kubisztal J, Górka-Kulikowska K. Effect of artificial saliva modification on the corrosion resistance and electronic properties of Bego Wirobond® C dental alloys. Appl Sci. 2023;13(22):12185. DOI: https://doi.org/10.3390/app132212185
Ximinis E, Dionysopoulos D, Papadopoulos C, Tournavitis A, Konstantinidis A, Naka O. Effect of tooth brushing simulation on the surface properties of various resin-matrix computer-aided design/computer-aided manufacturing ceramics. J Esthet Restor Dent. 2023;35:937–46. DOI: https://doi.org/10.1111/jerd.13043
Alshehri KA, Rayyan MR. Effect of simulated tooth brushing on the surface gloss of monolithic all-ceramic restorations: an in vitro study. Clin Oral Investig. 2025;29:133. DOI: https://doi.org/10.1007/s00784-025-06223-6
Ikawa T, Mizutani K, Sudo T, Kano C, Ikeda Y, Akizuki T, et al. Clinical comparison of an electric-powered ionic toothbrush and a manual toothbrush in plaque reduction: a randomized clinical trial. Int J Dent Hyg. 2021;19:93–8. DOI: https://doi.org/10.1111/idh.12475
Ledder RG, Latimer J, Forbes S, Penney JL, Sreenivasan PK, Mcbain AJ. Visualization and quantification of the oral hygiene effects of brushing, dentifrice use, and brush wear using a tooth brushing simulator. Front Public Health. 2019;7:91. DOI: https://doi.org/10.3389/fpubh.2019.00091
Chitra P, Prashantha GS, Rao A. Effect of fluoride agents on surface characteristics of NiTi wires. An ex vivo investigation. J Oral Biol Craniofac Res. 2020;10:435–40. DOI: https://doi.org/10.1016/j.jobcr.2020.07.006
Yıldırım G, Eraydın F, Nalbantgil D. Corrosion behavior of nickel-titanium arch wires following the use of different mouthwashes: an in vivo study. Turk J Orthod. 2024;37(3):168–73. DOI: https://doi.org/10.4274/TurkJOrthod.2023.2022.182
Lee H-T, Huang T-K, Lin S-Y, Chen L-K, Chou M-Y, Huang H-H. Corrosion resistance of different nickel-titanium archwires in acidic fluoride-containing artificial saliva. Angle Orthod. 2010;80:547–53. DOI: https://doi.org/10.2319/042909-235.1
Makrygiannakis MA, Gkinosati AA, Kalfas S, Kaklamanos EG. The effect of fluoride mouthwashes on orthodontic appliances’ corrosion and mechanical properties: a scoping review. Hygiene. 2025;5(2):23. DOI: https://doi.org/10.3390/hygiene5020023
Kassab E, Gomes J. Corrosion induced fracture of NiTi wires in simulated oral environments. J Mech Behav Biomed Mater. 2021;116:104323. DOI: https://doi.org/10.1016/j.jmbbm.2021.104323
Creeth J, Bosma ML, Govier K. How much is a ‘pea-sized amount’? A study of dentifrice dosing by parents in three countries. Int Dent J. 2013;63 Suppl 2:25–30. DOI: https://doi.org/10.1111/idj.12076
Gopalakrishnan U, Felicita AS, Qureshi T, Muruganandhan J, Hassan AaA, El-Shamy FM, et al. Effect of fluoridated mouthwashes on corrosion property of orthodontic appliances: a narrative review. J Contemp Dent Pract. 2022;23:460–6. DOI: https://doi.org/10.5005/jp-journals-10024-3326
Schiff N, Grosgogeat B, Lissac M, Dalard F. Influence of fluoridated mouthwashes on corrosion resistance of orthodontics wires. Biomaterials. 2004;25:4535–42. DOI: https://doi.org/10.1016/j.biomaterials.2003.11.042
Markovic E, Peric T, Kojic S, Stosic M, Scepan I, Petrovic B. Influence of casein phosphopeptide-amorphous calcium phosphate on the surface topography and composition of nickel-titanium archwires during orthodontic treatment with fixed appliances. J Oral Sci. 2024;66:60–5. DOI: https://doi.org/10.2334/josnusd.23-0276
Costa OD, Sunaia D, Gonuguntla Kamma PK, Mishra A, Sahu A, Patel R. Effect of arch wires and brackets in orthodontics for releasing nickel ions. Bioinformation. 2025;21:35–9. DOI: https://doi.org/10.6026/973206300210035
Ten Cate JM, Buzalaf MaR. Fluoride mode of action: once there was an observant dentist. J Dent Res. 2019;98:725–30. DOI: https://doi.org/10.1177/0022034519831604
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Karen Lisette Vega Bravo, Marjory Elizabeth Vaca Zapata, Mauricio Aguirre Balseca, Karina Maria Salvatore Freitas, Yalil Rodríguez
This work is licensed under a Creative Commons Attribution 4.0 International License.
Biomaterial Investigations in Dentistry is a Diamond Open Access peer-reviewed journal, publishing research in oral biomaterials science. The publishing of articles is free for authors, thanks to the support of Acta Odontologica Scandinavica Society (AOSS), a not-for-profit society. 
