The effect of simulated toothbrushing with regular and whitening dentifrices on the colour stability of high translucency zirconia
DOI:
https://doi.org/10.2340/biid.v13.46463Keywords:
High translucency zirconia, colour stability, toothbrushing simulation, dentifrice abrasion, CIELAB, spectrophotometryAbstract
Background: High translucency zirconia (HTZ) restorations are increasingly used for aesthetic dental applications due to their superior optical properties. However, colour stability under routine oral hygiene procedures, especially toothbrushing with regular or whitening dentifrices, remains a clinical concern. This study evaluated the effect of simulated toothbrushing on the colour stability (ΔE) of two different HTZ materials.
Methods: Sixty unglazed and unpolished HTZ samples (10 mm × 2 mm) were fabricated using Computer Aided Design and Computer Aided Manufacturing (CAD/CAM) technology and divided into two groups based on translucency (HTZ-A: 5.8–9.7 wt% yttria and HTZ-B: 4.4–5.5 wt% yttria; n = 30 each). Each group was subdivided into three subgroups (n = 10) according to the treatment: artificial saliva (control), regular dentifrice and whitening dentifrice. Baseline colour measurements were recorded using a reflectance spectrophotometer. Specimens underwent simulated toothbrushing or storage in artificial saliva for 520 min, simulating approximately 17 years of brushing. Colour differences (ΔE) were calculated using the CIELAB system. Data were analysed using one-way Analysis of Variance (ANOVA), Tukey’s post-hoc test and independent t-tests.
Results: Artificial saliva caused minimal colour change in both zirconia groups (ΔE = 1.677 for HTZA, 1.802 for HTZB). Regular dentifrice induced significant ΔE values (HTZ-A: 8.722, HTZ-B: 8.346), while whitening dentifrice caused a significantly highest colour change for HTZ-B (HTZ-A: 6.348, HTZ-B: 11.062). Pairwise comparison revealed significant differences among all subgroups (p < 0.05). Intergroup analysis showed a significant difference between HTZ-A and HTZ-B only in the whitening dentifrice subgroup (p = 0.0001).
Conclusion: Simulated toothbrushing significantly affects the colour stability of HTZ restorations. Whitening dentifrices produced the greatest colour change in highly translucent zirconia. Material composition and dentifrice selection should be considered to maintain long-term aesthetics of zirconia restorations.
Downloads
References
Conrad HJ, Seong WJ, Pesun IJ. Current ceramic materials and systems with clinical recommendations: a systematic review. J Prosthet Dent. 2007;98(5):389–404. DOI: https://doi.org/10.1016/S0022-3913(07)60124-3
Chittem J, Sajjan GS, Varma Kanumuri M. Spectrophotometric evaluation of colour stability of nano hybrid composite resin in commonly used food colourants in Asian countries. J Clin Diagn Res. 2017;11(1):ZC61–5. DOI: https://doi.org/10.7860/JCDR/2017/22919.9193
Kamonkhantikul K, Arksornnukit M, Lauvahutanon S, Takahashi H. Toothbrushing alters the surface roughness and gloss of composite resin CAD/CAM blocks. Dent Mater J. 2016;35(2):225–32. DOI: https://doi.org/10.4012/dmj.2015-228
Arai T, Kinoshita S. A comparison of plaque removal by different toothbrushes and toothbrushing methods. Bull Tokyo Med Dent Univ. 1977;24(2):177–88.
Pinelli LA, Gimenes Olbera AC, Candido LM, Miotto LN, Antonio SG, Fais LM. Effects of whitening dentifrice on yttria-stabilized tetragonal zirconia polycrystal surfaces after simulating brushing. J Prosthet Dent. 2017;117(1):158–63. DOI: https://doi.org/10.1016/j.prosdent.2016.05.005
Sulaiman TA, Abdulmajeed AA, Shahramian K, Hupa L, Donovan TE, Vallittu P, et al. Impact of gastric acidic challenge on surface topography and optical properties of monolithic zirconia. Dent Mater. 2015;31(12):1445–52. DOI: https://doi.org/10.1016/j.dental.2015.09.010
Piconi C, Maccauro G. Zirconia as a ceramic biomaterial. Biomaterials. 1999;20(1):1–25. DOI: https://doi.org/10.1016/S0142-9612(98)00010-6
Kim HK. Effect of A rapid-cooling protocol on the optical and mechanical properties of dental monolithic zirconia containing 3–5 mol% Y2O3. Materials (Basel). 2020;13(8):1923. DOI: https://doi.org/10.3390/ma13081923
Fusayama T, Katayori T, Nomoto S. Corrosion of gold and amalgam placed in contact with each other. J Dent Res. 1963;42(5):1183–97. DOI: https://doi.org/10.1177/00220345630420051301
Garza LA, Thompson G, Cho SH, Berzins DW. Effect of toothbrushing on shade and surface roughness of extrinsically stained pressable ceramics. J Prosthet Dent. 2016;115:489–94. DOI: https://doi.org/10.1016/j.prosdent.2015.09.013
Jasse FF, de Campos EA, Lefever D, Di Bella E, Salomon JP, Krejci I, et al. Influence of filler charge on gloss of composite materials before and after in vitro toothbrushing. J Dent. 2013;41(Suppl. 5):e41–4. DOI: https://doi.org/10.1016/j.jdent.2013.04.011
Bizhang M, Schmidt I, Chun YP, Arnold WH, Zimmer S. Toothbrush abrasivity in a long-term simulation on human dentin depends on brushing mode and bristle arrangement. PLoS One. 2017;12:e0172060. DOI: https://doi.org/10.1371/journal.pone.0172060
Creeth JE, Gallagher A, Sowinski J, Bowman J, Barrett K, Lowe S, et al. The effect of brushing time and dentifrice on dental plaque removal in vivo. J Dent Hyg. 2009;83:111–6.
Koizumi H, Saiki O, Nogawa H, Hiraba H, Okazaki T, Matsumura H. Surface roughness and gloss of current CAD/CAM resin composites before and after toothbrush abrasion. Dent Mater J. 2015;34(6):881–7. DOI: https://doi.org/10.4012/dmj.2015-177
Labban N, Al Amri MD, Alnafaiy SM, Alhijji SM, Alenizy MA, Iskandar M, et al. Influence of toothbrush abrasion and surface treatments on roughness and gloss of polymer-infiltrated ceramics. Polymers (Basel). 2021;13(21):3694. DOI: https://doi.org/10.3390/polym13213694
Carvalho LF, Alves LMM, Bergamo ETP, Benalcazar Jalkh EB, Campos TMB, Zahoui A, et al. Influence of abrasive dentifrices on polymeric reconstructive material properties after simulated toothbrushing. Biomater Investig Dent. 2023;10(1):2268670. DOI: https://doi.org/10.1080/26415275.2023.2268670
Lee JH, Kim SH, Han JS, Yeo IL, Yoon HI. Optical and surface properties of monolithic zirconia after simulated toothbrushing. Materials (Basel). 2019;12(7):1158. DOI: https://doi.org/10.3390/ma12071158
Roopa KB, Basappa N, Prabhakar AR, Raju OS, Lamba G. Effect of whitening dentifrice on micro hardness, colour stability and surface roughness of aesthetic restorative materials. J Clin Diagn Res. 2016;10(3):ZC06–11. DOI: https://doi.org/10.7860/JCDR/2016/15700.7350
Celik N, Iscan Yapar M. Colour stability of stained composite resins after brushing with whitening toothpaste. Int J Dent Hyg. 2021;19(4):413–20. DOI: https://doi.org/10.1111/idh.12529
Bativala F, Weiner S, Berendsen P, Vincent GR, Ianzano J, Harris WT Jr. The microscopic appearance and effect of toothbrushing on extrinsically stained metal ceramic restorations. J Prosthet Dent. 1987;57(1):47–52. DOI: https://doi.org/10.1016/0022-3913(87)90115-6
Sehovic E, Ioannidis A, Hämmerle CH, Özcan M, Mühlemann S. Effect of tooth brush abrasion on the colour, gloss and surface roughness of internally and externally stained monolithic ceramic materials. J Prosthodont Res. 2022;66(2):303–11. DOI: https://doi.org/10.2186/jpr.JPR_D_20_00276
Mahrous AA, Alhammad A, Alqahtani F, Aljar Y, Alkadi A, Taymour N, et al. The toothbrushing effects on surface properties and colour stability of CAD/CAM and pressable ceramic fixed restorations – an in vitro study. Materials (Basel). 2023;16(8):2950. DOI: https://doi.org/10.3390/ma16082950
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Basapogu Sreeramulu, Varsha Umesh Revankar, Akula Vineela Rani, Anusha Reddy Pucha
This work is licensed under a Creative Commons Attribution 4.0 International License.
Biomaterial Investigations in Dentistry is a Diamond Open Access peer-reviewed journal, publishing research in oral biomaterials science. The publishing of articles is free for authors, thanks to the support of Acta Odontologica Scandinavica Society (AOSS), a not-for-profit society. 
